User's Manual

22
6.6 CHANNEL SETUP
Normally, a customer specified channel plan is set up at the factory when the HDX-1100 is built,
however, additional channels may be added at any time, or existing channels may be redefined if
necessary. These changes can only be made by qualified technical service personnel.
CHANNEL PLAN SETUP SCREEN
For each channel to be added or set up, enter the correct frequency information
in the dialog box on the right-hand side of the screen corresponding to the
desired channel number. Once you have completed and checked the frequency
entry, click the submit button and the new frequencies will appear in the dialog
boxes on the left side of the screen.