User's Manual

Page 36

NewStream User Guide and Technical Manual

Figure 21: NewStream CNG Information Touchscreen

CNG Touchscreens

When the NewStream has the capability of operating in a cellular mode, the

touchscreens are labeled CNG displaying information and settings speciﬁ c to cellular

transmission. When the

NewStream does not detect the cellular ODU, the CNG

information screen shows the message Cellular ODU is loading, please wait. Once

the cellular ODU has booted up and can provide information about its conﬁ guration, the

message changes to a status screen describing the current connectivity of the modems

in the cellular ODU. This CNG Information screen displays the following:

1. A graphical representation of the current RSSI per modem using signal strength

bars similar to a phone.

a. If RSSI > 120 = 5 gray bars

b. If RSSI > 95 and < 120 = 1 red bar, 4 gray bars

c. If RSSI > 85 and < 95 = 2 amber bars, 3 gray bars

d. If RSSI > 75 and < 85 = 3 amber bars, 2 gray bars

e. If RSSI > 60 and < 75 = 4 green bars, 1 gray bar

f. If RSSI > 1 and < 60 = 5 green bars

g. When a modem is not detected the words No Modem replace the signal bars

graphic.

h. If a modem is detected but there is no SIM card installed, the words No Card

replaces the signal bars.

i. If a modem and a SIM card are detected but not yet not connected to a

network, the word Connecting replaces the signal bars

2. The name of the carrier to which the modem is connected.

3. The service [3G/4G/LTE] to which the modem is connected.

4. The number of the SIM card slot in which the SIM is inserted.

The CNG Information touchscreen is shown below in Figure 21. This screen displays

the relative signal strength information for each of the six modems