User's Manual

Page 64
NewStream User Guide and Technical Manual
Satelitte Status Page [Continued]
Frequency
This box displays the BUC Frequency for which NewStream is currently set.
With BUC [Block Up-Converter Enabling]
The block up-converter [BUC] is used in the transmission [uplink] of satellite signals. It
converts a band of frequencies from a lower frequency to a higher frequency. Modern
BUCs convert from the L-Band to Ku-band, C-band and Ka-band.
• BUC LO Type: This fi eld displays the BUC Local Oscillator [LO] Type frequency
for which NewStream is currently set. You can select Low or High Side for your
SNG system’s Local Oscillator.
• BUC Frequency: This fi eld displays the BUC Frequency for which NewStream
is currently set.
• Frequency: This fi eld displays the Frequency for which NewStream is currently
set.
L-Band Frequency
The ODUs operate on L-Band with BUC disabled. This fi eld displays the seleced
L-Band frequency.
Frequency Plan
This fi elld displays Satellite when using a SNG Preset.
Apply
You can reset frequency confi gurations by clicking the Apply button.