User's Manual

Page 90
NewStream User Guide and Technical Manual
When you choose the Block Up-converter option and press Save, you may encounter
the Invalid Fields Message [see the example below in Figure 40]:
Invalid fi elds. Please review and make sure all Channel and Frequency fi elds contain
valid data. Each Frequency must be in the range: 950.000 to 1750.000.
Channel numbers must range from 1-99.
Once you have selected the proper ranges, a dialog box appears asking you to confi rm
your entries:
Are you sure you want to save this channel plan and overwrite the existing one?
Click Yes to continue and to save the updated or new Satellite Channel Plan.
Channel Number [#]
Channel Number [#]
The satellite Channel Number range varies for each frequency plan. To add a channel,
click the
button. To delete a channel, click the button and confi rm your action.
Each channel displays the frequency range as shown in the example.
Frequency
The frequency is displayed for the channel and can be modifi ed using your keypad. The
frequency that you type must conform to the valid range and will not be accepted if it
does not [see Figure 40].
NOTE: You must create a Channel via this Web page, in Remote control, to access
the channel plan setting under Local control using the IDU touchscreen. Refer to the
Channel Plan example in the Satellite [SNG] Operation touchscreen section for an
example of this selection process.
Save
Click the Save button to retain your new Channel Plans.
Figure 40: NewStream Invalid Fields Message