User Manual Part 1

Advanced Operations 5-10MTX5000 User and Technical Manual
Figure 5-14: VIDEO INPUT Options - Typical
16. Select the Back option button and observe the FMT
SETUP screen is displayed. See Figure 5-15.
Figure 5-15: FMT SETUP Screen
17. Select the Audio CH1 option button and observe the
AUDIO CH1 screen is displayed. See Figure 5-16.
FMT VIDEO
Back
VIDEO DEVIATION 3 MHz 4 MHz
VIDEO INPUT
Composite
Baseband
Composite
Main
FMT SETUP
Back
Video Deviation
Audio CH1
Audio CH3 Audio CH4
Audio CH2
Main
Audio Deviation
Figure 5-16: AUDIO CH1 Screen - Typical
Notes
The ENABLE setting must be set to On to enable
the PRE-EMPHASIS option button and the audio
FREQUENCY pull-down menu.
If the ENABLE - Off option is required, go to step
18.
To enable PRE-EMPHASIS and/or select the audio
FREQUENCY, go to step 19.
18. Select the ENABLE option button to select the Off
option and observe the PRE-EMPHASIS option button
and the FREQUENCY pull-down menu become
inactive (greyed-out). Go to step 25.
19. Select the ENABLE option button to select the On
option and observe the PRE-EMPHASIS option button
becomes active (not greyed-out).
20. Select the PRE-EMPHASIS option button and select
On or Off, as required.
AUDIO CH1
Back
ENABLE Off FREQUENCY
PRE-EMPHASIS On
4830 kHz
Main