User Manual Part 1

Advanced Operations 5-11MTX5000 User and Technical Manual
Note
In the following step, the FREQUENCY pull-down
menu may be used to select fixed audio
frequencies or you may select the Custom option
to create custom audio frequencies.
To select a fixed audio frequency, go to step 21.
To select a custom audio frequency, go to step 22.
21. Use the FREQUENCY pull-down menu (See Figure 5-
17) to select the frequency option required and go to
step 25.
Figure 5-17: Frequency Pull-Down Menu - Typical
22. Use the FREQUENCY pull-down menu to select the
Custom option and observe the FREQUENCY option
button becomes active (not greyed-out).
23. Select the FREQUENCY option button and observe
the numeric keypad is displayed. See Figure 5-18.
AUDIO CH1
Back
ENABLE On FREQUENCY
PRE-EMPHASIS On
4830 kHz
5200 kHz
5800 kHz
6200 kHz
4830 kHz
Main
Figure 5-18: Numeric Keypad
24. Enter the custom audio frequency required (range is
4830 kHz to 8590 kHz), select the ENT key, and
observe the AUDIO CH1 screen is displayed.
25. Select the Back option button and observe the FMT
SETUP screen is displayed.
26. Select the Audio CH2 option button and observe the
AUDIO CH2 screen is displayed. See Figure 5-19.
Figure 5-19: AUDIO CH2 Screen - Typical
1 2 3
4
7
5 6
8 9
CLR
0
ESC
ENT
AUDIO CH2
Back
ENABLE Off FREQUENCY
PRE-EMPHASIS On
4830 kHz
Main