User Manual Part 1

Advanced Operations 5-20MTX5000 User and Technical Manual
11. Use the Guard Interval pull-down menu and select
1/32, 1/16, 1/8, or 1/4, as required.
12. Use the Constellation pull-down menu to select
QPSK, 16-QAM, or 64-QAM, as required.
13. Use the RF B/W pull-down menu to select 6 MHZ,
7 MHZ, or 8 MHZ, as required.
14. Select the Back option button and observe the
Operation Mode screen is displayed. See Figure 5-
39.
Figure 5-39: Operation Mode Screen
15. Select the MPEG option button and observe the
MPEG screen is displayed. See Figure 5-40.
Operation Mode
Back
COFDM FMT ASI
IP
SCM
LMS-T
Save As Preset
DVBS
MPEG
Main
Figure 5-40: MPEG Screen - Typical
16. Select the Video In option button and observe the
Video In screen is displayed. See Figure 5-41.
Figure 5-41: Video In Screen - Typical
Note
In the following step, select an Input option
applicable to the licensed options contained in your
MTX5000 IDU only. Selection of an option that is
not licensed in your radio will cause the IDU to
operate in the NTSC default mode.
MPEG
Back
Video In
Audio In
Encoder
NormalSpectrum Invert
Encoding
Main
Video In
Back
Input
NTSC
Video In2