User Manual Part 1

Advanced Operations 5-25MTX5000 User and Technical Manual
Figure 5-53: Numeric Keypad
65. Enter the Program ID PID required, select the ENT
key, and observe the PID-2 screen is displayed.
66. Select the Network ID option button and observe the
numeric keypad is displayed.
67. Enter the Network ID PID required, select the ENT
key, and observe the PID-2 screen is displayed.
68. Select the Transport ID option button and observe the
numeric keypad is displayed.
69. Enter the Transport ID PID required, select the ENT
key, and observe the PID-2 screen is displayed.
70. Select the Back option button and observe the PID
screen is displayed.
71. Select the Back option button and observe the
Encoder screen is displayed.
72. Select the Remux option button for On or Off, as
required.
73. Select the PTS per Picture option button for On or
Off, as required.
74. Select the VBI option button for On or Off, as required.
75. Select the Back option button and observe the
Encoder screen is displayed.
1 2 3
ESC
0
4
7
5 6
8 9
DEL
0
ESC
ENT
76. Select the Back option button and observe the MPEG
screen is displayed. See Figure 5-54.
Figure 5-54: MPEG Screen - Typical
77. Select the Encoding option button and observe the
Encoding screen is displayed. See Figure 5-55.
Figure 5-55: Encoding Screen - Typical
78. Select the Service Name option button and observe
the keyboard screen is displayed. See Figure 5-56 on
page 5-26.
MPEG
Back
Video In
Audio In
Encoder
NormalSpectrum Invert
Encoding
Main
Encoding
Back
Service Name
Network Name
EBS/BISS Wayside data
Service 01
Main