User Manual Part 1

Advanced Operations 5-26MTX5000 User and Technical Manual
Figure 5-56: Keyboard Screen
79. Enter the service name required, select the Enter key,
and observe the Encoding screen is displayed.
80. Select the Network Name option button and observe
the keyboard screen is displayed.
81. Enter the network name required, select the Enter
key, and observe the Encoding screen is displayed.
Notes
If your MTX5000 IDU contains a licensed EBS or
BISS encryption option, go to step 82.
If your MTX5000 IDU does not contain a licensed
EBS or BISS encryption option, go to step 88.
82. Observe the EBS/BISS option button is active (not
greyed-out).
83. Select the EBS/BISS option button and observe the
Encryption screen is displayed. See Figure 5-57.
! @ # $ % ^ & * ( ) _ +
Q W E R T Y U I O P { }
A S D F G H J K L :
Z X C V B N M < > ?
Shift BS
Clear CancelEnter
“
Figure 5-57: Encryption Screen
Notes
You can only have one licensed encryption option
contained in your MTX5000 IDU.
When the Scrambling pull-down menu EBS,
BISS-1, or BISS-E option is selected in the
following step, the selected option key will be
active, but the two remaining option buttons will
become inactive (greyed-out).
84. Select the Scrambling pull-down menu EBS, BISS-1,
or BISS-E option, as required, and observe the
selected EBS, BISS-1, or BISS-E Key option button is
active.
85. Select the EBS, BISS-1, or BISS-E Key option button,
as required, and observe the alphanumeric keypad is
displayed. See Figure 5-58 on page 5-27.
Encryption
Back
EBS Key
BISS-1 Key
BISS-E Key
xx Scrambling
xx
xx
Main