User Manual Part 1

Routine Operation 3-13MTX5000 User and Technical Manual
3.4.3 Color LCD Display Panel
All menus and screens displayed on the color LCD display panel
consist of active option buttons, setting indicators, or status
indicators. See Figure 3-9. The currently selected active option
button will be blue with white text. Active option buttons that may
be selected are grey with black text or white text on the blue
background (e.g., the Preset option button). Grey option buttons
with dark grey text are inactive and cannot be selected.
Figure 3-9: Color LCD Display Panel - Typical
On the Main screen, a brief description of the currently selected
Preset is displayed in white with red text, surrounded by a black
outline.
Channel 1 0Offset
Antenna Ant. Pol.Antenna1 V
RFU2
7US
RF Band
Preset A
Analog
4.83 & 5.8, 3MHz Vid Dev
RF Output
XX
dBm
<- Status Setup Status ->
PA On
SUM
ODU
IDU
RF
L/R
H
L
Setting
Indicators
(Black
Outlines) -
Typical
Active Option Buttons (Blue
Background) - Typical
PA Operation
Button
Navigation Option
Buttons - Typical
Current Preset
Description - Typical
Status
Indicators
Local/Remote
Status Button
3.4.4 Touch Screen and Function Keys
CAUTION
Avoid damage to the color LCD display
panel!
The color LCD display panel touch screen
may be damaged if a sharp, hard-pointed
object, such as a pencil or a pen, is used to
select the displayed options.
Touch screen options must only be selected
using your fingers, a soft-pointed stylus, or
the front panel function keys.
Damage to the color LCD display panel
caused by using a hard-pointed object or
other misuse may void your warranty on
the MTX5000 IDU.
The color LCD display panel touch screen or function keys may
be used to select active option buttons displayed on the color
LCD display panel. To select a specific active option button
using the touch screen, simply touch the required active option
button on the color LCD display panel to select the option.
When active option buttons are selected, the option button will
change from grey to blue and the text color will change
accordingly. Setting indicators are white with black text,
surrounded by a black outline. Active option buttons are
selected using either the color LCD display panel touch screen
or the function keys.
To use the function keys (See Figure 3-10 on page 3-14) to
select a specific active option, use the Up, Down, Left, and Right
function keys to select the required active option button, press