User Manual Part 1

Routine Operation 3-16MTX5000 User and Technical Manual
Figure 3-13: Summary Alarm Dialog Box - Typical
If no alarms are present, the dialog box will indicate No Errors.
If alarms are present, the IDU and/or ODU alarms will be listed in
the dialog box. See ”Error Messages” on page 4-1 for a list of
possible alarms that may be listed in the dialog box.
The screen contains an OK option button that, when selected,
removes the screen from the display.
3.4.7 Local/Remote Control Status Button
The Main page local/remote L/R status button indicates the
MTX5000 is in either the local operation mode or in the remote
operation mode. When the L option is displayed, the status
indicator will be green. When the R option is selected, the status
indicator will be amber.
When the option button is in the L mode, all control operations
must be performed at the MTX5000. When in the R mode and
the MTX5000 is connected via your web browser to a PC at a
remote location or to the optional Remote Access Subnotebook
PC during mobile operations, the operations must be performed
at the remote PC.
You can connect to the MTX5000 from a remote location when
the MTX5000 is in either the local or remote operation mode. If
you are connected to the MTX5000 via your web browser from a
remote location or to the optional Remote Access Subnotebook
PC and the MTX5000 is in the local operation mode, you can
OK
Summary Alarm
xxxxxxxxxxxxxxxxx
monitor status settings from the remote location, but no settings
may be changed from the remote PC. You must be in the remote
operation mode to monitor and control the MTX5000 remotely.
To select the remote operation mode, you must use the Setup
screens. To change from the remote mode to the local mode,
you must select the Main screen L/R status button.
Selection of the local/remote operating mode can only be
performed at the MTX5000. You cannot change the local/
remote operating mode from the remote location. For
information on using the MTX5000 in the remote operating
mode, see ”Using the MTX5000 in Remote Mode” on page 3-60.
3.4.8 Setup Screen Options
The Main screen Setup option button and the associated setup
option screens are described in the following paragraphs.
Setup Screen The Main screen Setup option button provides
you with access to the Setup screen when the Setup option
button is selected. See Figure 3-14.
Figure 3-14: Setup Screen
Setup
User
Main
Radio