User Manual Part 1

Routine Operation 3-37MTX5000 User and Technical Manual
Note
The ODU status button may be selected from the
Main screen or from any screen that is accessible
from the Main screen. The screen shown in
Figure 3-64 is therefore typical.
1. Select the ODU status button. See Figure 3-64.
Figure 3-64: Main Screen - Typical
2. Observe the ODU Status screen is displayed. See
Figure 3-65.
Figure 3-65: ODU Status Dialog Box - Typical
Channel 1 0Offset
Antenna Ant. Pol.Antenna1 H
RFU2
7US
RF Band
Preset A
Analog
4.83 & 5.8, 3MHz Vid Dev
RF Output
XX
dBm
<- Status
Setup
Status ->
PA On
SUM
ODU
IDU
RF
L/R
H
L
ODU
Status
Button
OK
ODU Status
xxxxxxxxxxx
3. When review of ODU Status messages is complete,
select the OK option button and observe the ODU
Status screen is no longer displayed.
3.6.10 Monitor IDU Status
The procedure required to monitor the current alarm status of the
IDU is contained in the following steps.
Note
In the following procedure, the IDU status button
may be selected using either the touch screen or
the function keys and the SEL key.
Note
The IDU status button may be selected from the
Main screen or from any screen that is accessible
from the Main screen. The screen shown in
Figure 1 is therefore typical.
1. Select the IDU status button. See Figure 3-66.
Figure 3-66: Main Screen - Typical
Channel 1 0Offset
Antenna Ant. Pol.Antenna1 H
RFU2
7US
RF Band
Preset A
Analog
4.83 & 5.8, 3MHz Vid Dev
RF Output
XX
dBm
<- Status
Setup
Status ->
PA On
SUM
ODU
IDU
RF
L/R
H
L
IDU
Status
Button