User Manual Part 1

Routine Operation 3-50MTX5000 User and Technical Manual
Figure 3-101: Main Screen - Typical
2. Select a digital Preset per “Select Preset” on page 3-
24, as required.
Note
If your MTX5000 system is a dual band system,
step 3 thru step 10 must be performed for both
bands.
3. Select the RF Band option button and observe the RF
Band screen is displayed and the current RF band
option button is highlighted. See Figure 3-102.
Channel 1 0Offset
Antenna Ant. Pol.Antenna1 H
RFU2
7US
RF Band
Preset A
Analog
4.83 & 5.8, 3MHz Vid Dev
RF Output
XX
dBm
<- Status
Setup
Status ->
PA On
SUM
ODU
IDU
RF
L/R
H
L
Setup Option
Button
RF Band
Option
Button
Figure 3-102: RF Band Screen - Typical
4. Select the RF band option button required, observe
the RF Band screen is displayed, select the Main
option button, observe the Main screen is displayed,
and observe the new RF band setting is displayed.
5. Select the Setup option button and observe the Setup
screen is displayed. See Figure 3-103.
Figure 3-103: Setup Screen
2GHz Change Plan
RFU2
RFU1
RF Band
Main
PA On
SUM
ODU
IDU
RF
L/R
H
L
Main Screen
Option Button
RF Band
Option
Buttons
Setup
User
Main
Radio