User Manual Part 1

Routine Operation 3-51MTX5000 User and Technical Manual
6. Select the Radio option button and observe the Radio
screen is displayed.
See Figure 3-104.
Figure 3-104: Radio Screen
7. Select the Level Adjust option button and observe the
RF Output Level Adjust screen is displayed. See
Figure 3-105.
Figure 3-105: RF Output Level Adjust Screen
Radio
Back
Network Config Level Adjust Color Bars
Calibration
Time & Date
Change Pwd
System Info
License Key
Diagnostics
NextMain
Back
RF Output Level Adjust
Attenuation Output Power
Auto
40.0 dBm
Main
CAUTION
It is highly recommended that the RF output
level be set to the Auto mode for optimum
performance.
Manually setting the RF output level runs
the risk of exceeding the FCC mask or
deteriorating digital performance.
Notes
In the following steps, Attenuation level options
available are Auto or 0 to 15.
The Auto option is the optimum attenuation level
set at the factory and is the recommended
Attenuation level option.
8. Select the RF Output Level Adjust screen Up or
Down arrow option buttons to select the Attenuation
level required. Options are Auto or 0 to 15 (Auto
recommended).
9. When the Attenuation setting required has been
selected, select the Back option button and observe
the Radio screen is displayed. See Figure 3-106 on
page 3-52.