User Manual Part 1

Routine Operation 3-54MTX5000 User and Technical Manual
6. Select the Color Bars option button and observe the
Color Bars screen is displayed.
See Figure 3-110.
Figure 3-110: Color Bars Screen
Note
If the On operating mode option is selected in the
following step for test or troubleshooting, repeat
step 7 to select Off, A Gen, or A Stby, as required,
when test or trouble-shooting is complete.
7. Select the Off, On, A Gen, or A Stby operating mode
option button, as required.
8. Select the Color Bars screen Main option button and
observe the Main screen is displayed.
3.6.16 Set Time and Date
The procedure required to set the date and time is contained in
the following steps.
Color Bars
A GenOnOff A Stby
Back
Main
Note
In the following procedure, option buttons may be
selected using either the touch screen or the
function keys and the SEL key.
1. Observe the Main screen is displayed. See Figure 3-
111.
Figure 3-111: Main Screen - Typical
2. Select the Setup option button and observe the Setup
screen is displayed. See Figure 3-112 on page 3-55.
Channel 1 0Offset
Antenna Ant. Pol.Antenna1 H
RFU2
7US
RF Band
Preset A
Analog
4.83 & 5.8, 3MHz Vid Dev
RF Output
XX
dBm
<- Status
Setup
Status ->
PA On
SUM
ODU
IDU
RF
L/R
H
L
Setup Option
Button