User Manual Part 1

Routine Operation 3-62MTX5000 User and Technical Manual
• Select Antenna Polarity
• Select PA Control (transmitter) operation
• Select RF Power level
• Monitor ODU, IDU, and SUM (summary) alarms
• Monitor currently selected Preset configuration settings.
See Figure 3-131 on page 3-63 for the top level remote menu
hierarchy.
The remote screen Main tab is your starting point for navigating
through various option selections available. The remote screen
provides access to options available in your MTX5000 through
the use of various tabs and pull-down menus.
When a tab is selected, the tab is grey. Tabs will be blue when
they are not selected. The mouse cursor will change to a “hand”
icon (-) when the cursor is moved over an active tab. If an
active tab is selected and the cursor is moved over the active
tab, the cursor will not change to the “hand” icon, however.
When an active tab is selected, any additional active tabs
associated with the active tab may be selected. For example, if
an analog Preset is selected, the Main, Status, and Log Out
tabs will be active. The Setup tab is active only when a custom
user or the system administrator has logged in.
Tab options available from the Status tab are those applicable to
the licensed options contained in your MTX5000 IDU only.