User Manual Part 2

Installation 6-20MTX5000 User and Technical Manual
Table 6-5: IDU Rear Panel Connections
Connector Type Function Comments
ETHERNET RJ-45 connector
Provides connection via your web
browser to a PC at a remote location
for remote control of the MTX5000
IDU. See ”Remote Control
Operations” on page 6-26
Also provides connection to the
optional Remote Access Subnotebook
PC for mobile operation remote
control.
See ”Remote Control
Operations” on page 6-26.
WAYSIDE 9-Pin male D-connector The WAYSIDE connector provides
Wayside data output from the MPEG
module.
See ”Wayside Data Connections”
on page 6-24 for pinouts.
AUDIO 1 thru AUDIO 4 • AUDIO 1 - 3 pin Weidmuller
• AUDIO 2 - 3 pin Weidmuller
• AUDIO 3 - 3 pin Weidmuller
• AUDIO 4 - 3 pin Weidmuller
The AUDIO 1 thru AUDIO 4 male 3-pin
Weidmuller connectors provide analog/
digital switchable stereo audio signal
inputs to the FMT or MPEG modules.
(AUDIO 3 and 4 are currently inactive.)
See ”Analog Audio Inputs” on
page 6-25 for pinouts.
BB IN 75 ohm BNC female connector The BB IN connector provides baseband
input video from an external baseband
source.
Composite analog signal - video +
audio subcarriers
IF MON 75 ohm BNC female connector The IF MON connector provides a 70
MHz IF output for external signal
monitoring purposes.
70 MHz IF output
ASI 1 75 ohm BNC female connector (Currently inactive.) (Currently inactive.)
HD-SDI 75 ohm BNC female connector The HD-SDI connector provides the HD/
SDI data stream input to the IDU.
The MTX5000 meets SMPTE 292M
specifications for HD-SDI. The user is
responsible for using cables that meet
SMPTE 292M specifications.
ASI 2 75 ohm BNC female connector (Currently inactive.) (Currently inactive)