User Manual Part 2

Advanced Operations 5-44MTX5000 User and Technical Manual
Figure 5-102: Alphanumeric Keypad
Note
When the Encryption screen is displayed and the
encryption key is entered in the following step, the
encryption key will not be displayed.
85. Enter your encryption key, select the ENT key, and
observe the Encryption screen is displayed.
86. Select the BACK option button and observe the
Encoding screen is displayed. See Figure 5-103.
Figure 5-103: Encoding Screen - Typical
1 2 3
0
4
7
5 6
8 9
DEL CAN
0 ENT
A D
B E
C F
Encoding
Back
Service Name
Network Name
EBS/BISS Wayside data
Service 01
Main
87. Select the Wayside data option button and observe
the Wayside Data screen is displayed.
See Figure 5-
104.
Figure 5-104: Wayside Data Screen - Typical
88. Select the Data Enable pull-down menu and select
the Off, TTV Format, CJM2 Format, or Low Delay
CJM2 option, as required.
89. Select the Baud Rate pull-down menu and select the
1200, 2400, 4800, 9600, 19200, or 38400 option, as
required.
90. Select the Back option button and observe the
Encoding screen is displayed.
91. Select the Back option button and observe the MPEG
screen is displayed.
92. Select the Back option button and observe the
Operation Mode screen is displayed. See Figure 5-
105 on page 5-45.
Wayside Data
Back
Data Enable Baud Rate
Off 2400
Main