User Manual Part 2

Advanced Operations 5-47MTX5000 User and Technical Manual
Figure 5-110: Please Wait Message Box
101. After a short delay, observe the Save As Preset
screen is displayed.
102. Select the Main option button and observe the Main
screen is displayed.
5.4.5 Create or Update Digital DVB-S Preset
Configuration Settings in Local Mode
The procedure required to create a new custom digital DVB-S
Preset configuration or to update an existing digital DVB-S
Preset configuration is contained in the following steps.
When preparing a new digital DVB-S Preset, you must first
select an existing digital DVB-S Preset from either the digital
DVB-S factory default Preset or from your own custom digital
DVB-S Presets. The selected Preset will be used as a “make-
from” to prepare the new digital DVB-S Preset configuration.
Please note that while factory default Presets may be used to
prepare a new Preset configuration, these factory default
Presets cannot be changed or deleted. They can only be
used as “make-froms”.
When the new configuration is prepared using the factory default
Preset, it cannot be saved with the factory Preset number or
Preset name. A new Preset number and Preset name must be
assigned to the new Preset.
No
Please Wait!
Yes
When using a custom Preset as a “make-from”, the new Preset
should be saved with a new Preset number. When you save the
new Preset, the Preset number will automatically be increased to
the next available Preset number. If you select an existing
Preset number when saving the new Preset, the original custom
Preset will be overwritten and cannot be recovered. The only
way to restore a Preset that has been overwritten is to re-enter
the custom Preset data from scratch.
If you are updating configuration settings on an existing custom
Preset, when you save the configuration settings, the Preset
number will automatically be increased to the next available
Preset number. You must enter and save the configuration
settings using the original Preset number.
Note
In the following steps, the color LCD display option
buttons and pull-down menu options may be
selected using either the touch screen or the
function keys and the SEL key.
1. Verify the MTX5000 IDU is powered up. See
”Powering the MTX5000 System” on page 3-7.
2. Observe the Main screen is displayed. See Figure 5-
111 on page 5-48.