User Manual Part 2

Advanced Operations 5-48MTX5000 User and Technical Manual
Figure 5-111: Main Screen - Typical
3. Select the L/R option button for L (local mode), as
required.
Notes
If you are updating an existing digital DVB-S Preset
configuration, select the Preset to be updated in
the following step.
If you are creating a new digital DVB-S Preset
configuration, any digital DVB-S Preset may be
selected in the following step.
4. Perform “Select Preset” on page 3-24 to select the
digital DVB-S Preset required to be updated or to be
used as a “make-from”.
5. Select the Main screen PA operation button for PA
Off, as required.
6. Select the Main screen Setup option button and
observe the Setup screen is displayed. See Figure 5-
112.
Channel 1 0Offset
Antenna Ant. Pol.Antenna1 H
RFU1
No RF
RF Band
Preset A
Analog
4.83 & 5.8, 3MHz Vid Dev
RF Output
XX
dBm
<- Status
Setup
Status ->
PA Off
SUM
ODU
IDU
RF
L/R
L
L
PA
Operation
Button
Figure 5-112: Setup Screen
7. Select the User option button and observe the
keyboard screen is displayed. See Figure 5-113.
Figure 5-113: Keyboard Screen
8. Enter your password, select the Enter key, and
observe the Operation Mode screen is displayed.
See Figure 5-114 on page 5-49.
Setup
User
Main
Radio
! @ # $ % ^ & * ( ) _ +
Q W E R T Y U I O P { }
A S D F G H J K L :
Z X C V B N M < > ?
Shift BS
Clear CancelEnter
“