User Manual Part 2

Advanced Operations 5-51MTX5000 User and Technical Manual
22. Use the Input pull-down menu to select the video
input option required.
23. Select the Video In2 option button and observe the
Video In screen 2 is displayed.
See Figure 5-121.
Figure 5-121: Video In Screen 2 - Typical
24. Select the Noise Reduction option button for On or
Off, as required.
25. Select the SDI Auto Line option button for On or Off,
as required.
26. Select the HD Test Pattern option button for On or
Off, as required.
27. Select the Back option button and observe the Video
In screen is displayed.
28. Select the Back option button and observe the MPEG
screen is displayed. See Figure 5-122.
Video In
Back
Noise Reduction
SDI Auto Line
Off
Off HD Test Pattern Off
Main
Figure 5-122: MPEG Screen - Typical
29. Select the Audio In option button and observe the
AUDIO 1 screen is displayed. See Figure 5-123.
Figure 5-123: AUDIO 1 Screen - Typical
30. Use the Mode pull-down menu to select Stereo or
Dual Mono, as required.
31. Use the Standard pull-down menu to select Off,
MPEG Layer II, Linear PCM, or MPEG Layer I, as
required.
MPEG
Back
Video In
Audio In
Encoder
NormalSpectrum Invert
Encoding
Main
AUDIO 1
Back
Mode Standard Bit Rate
MPEG Layer II
Input
Dual Mono
192 Kbps
Analog
Audio 2Main