User Manual Part 2

Advanced Operations 5-52MTX5000 User and Technical Manual
32. Use the Bit Rate pull-down menu to select 128 Kbps,
160 Kbps, 192 Kbps, 224 Kbps, 256 Kbps, 320
Kbps, or 384 Kbps, as required.
33. Use the Input pull-down menu to select Test Tone,
Analog, or SDI Emb, as required.
34. Select the Audio 2 option button and observe the
AUDIO 2 screen is displayed. See Figure 5-124.
Figure 5-124: AUDIO 2 Screen - Typical
35. Use the Mode pull-down menu to select Stereo or
Dual Mono, as required.
36. Use the Standard pull-down menu to select Off,
MPEG Layer II, Linear PCM, or MPEG Layer I, as
required.
37. Use the Bit Rate pull-down menu to select 128 Kbps,
160 Kbps, 192 Kbps, 224 Kbps, 256 Kbps, 320
Kbps, or 384 Kbps, as required.
38. Use the Input pull-down menu to select Test Tone,
Analog, SDI Emb, AES-EBU, or Channel Ide, as
required.
39. Use the Balance pull-down menu to select
Unbalanced or Balanced, as required.
AUDIO 2
Back
Mode Standard Bit Rate
MPEG Layer II
Input
Dual Mono
192 Kbps
Analog
Main
Balance
Unbalanced
40. Select the Back option button and observe the AUDIO
1 screen is displayed.
41. Select the Back option button and observe the MPEG
screen is displayed.
See Figure 5-125.
Figure 5-125: MPEG Screen - Typical
42. Select the Spectrum Invert option button to select
Normal or Inverted, as required.
43. Select the Encoder option button and observe the
Encoder screen is displayed. See Figure 5-126.
Figure 5-126: Encoder Screen - Typical
MPEG
Back
Video In
Audio In
Encoder
NormalSpectrum Invert
Encoding
Main
Encoder
Back
Mode Bit Rate
Low delay
4.9 Mb/s
Bit Rate
On
MP@ML
Encoder 2
Bit Rate Auto GOP Length 15
Main
ASI Bit Rate
5.529
Mb/s