User Manual Part 2

Advanced Operations 5-63MTX5000 User and Technical Manual
Figure 5-152: Numeric Keypad
CAUTION
When entering the video bit rate in the
following step, the bit rate value entered
cannot exceed the IP Setup screen Max Bit
Rate value minus 1.22 Mbps. Exceeding
the Max Bit Rate value minus 1.22 Mbps
will result in no video output.
For example, a Max Bit Rate value of
19.350 Mbps - 1.22 Mbps = 18.130 Mbps.
Therefore, the video bit rate entered in the
following step must not exceed 18.130
Mbps.
18. Enter the video bit rate required and select the ENT
option button.
19. Select the Submit option button.
20. Select the Back option button and observe the IP
Config screen is displayed.
21. Select the Back option button and observe the
Operation Mode screen is displayed. See Figure 5-
153.
1 2 3
ESC
0
4
7
5 6
8 9
DEL
0
ESC
ENT
Figure 5-153: Operation Mode Screen
22. Select the MPEG option button and observe the
MPEG screen is displayed. See Figure 5-154.
Figure 5-154: MPEG Screen - Typical
23. Select the Video In option button and observe the
Video In screen is displayed. See Figure 5-155 on
page 5-64.
Operation Mode
Back
COFDM FMT ASI
IP
SCM
LMS-T
Save As Preset
DVBS
MPEG
Main
MPEG
Back
Video In
Audio In
Encoder
NormalSpectrum Invert
Encoding
Main