User Manual Part 2

Advanced Operations 5-66MTX5000 User and Technical Manual
42. Select the Back option button and observe the AUDIO
1 screen is displayed.
43. Select the Back option button and observe the MPEG
screen is displayed.
See Figure 5-160.
Figure 5-160: MPEG Screen - Typical
44. Select the Spectrum Invert option button to select
Normal or Inverted, as required.
45. Select the Encoder option button and observe the
Encoder screen is displayed. See Figure 5-161.
Figure 5-161: Encoder Screen - Typical
MPEG
Back
Video In
Audio In
Encoder
NormalSpectrum Invert
Encoding
Main
Encoder
Back
Mode Bit Rate
Low delay
4.9 Mb/s
Bit Rate
On
MP@ML
Encoder 2
Bit Rate Auto GOP Length 15
Main
ASI Bit Rate
5.529
Mb/s
46. Select the Mode pull-down menu and select Standard
or Low delay, as required.
47. Select the Bit Rate pull-down menu and select
MP@ML or 422P@ML, as required.
Notes
In the following step, if the Bit Rate Auto option
button On option is selected, the Bit Rate option
button will be inactive (greyed out). Go to step 50.
If the Bit Rate Auto option button Off option is
selected, the Bit Rate option button will be active.
Go to step 49.
48. Select the Bit Rate Auto option button for Off or On,
as required.
49. Observe the Bit Rate option button is active. Select
the Bit Rate option button and observe the numeric
keypad is displayed. See Figure 5-162.
Figure 5-162: Numeric Keypad
50. Enter the bit rate required, select the ENT key, and
observe the Encoder screen is displayed.
1 2 3
ESC
0
4
7
5 6
8 9
DEL
0
ESC
ENT