User Manual Part 2

Advanced Operations 5-77MTX5000 User and Technical Manual
Notes
In the following steps, if a factory Default analog
Preset was used as a “make-from” to prepare this
custom Preset, the Preset Text text box and the
Preset Number text box must be changed. You
cannot change or overwrite any factory default
Presets!
If a custom User analog Preset was used as a
“make-from” to prepare this custom Preset, a brief
description of the custom Preset should be entered
in the Preset Text text box for easy identification
purposes. The Preset number must be changed
only if you do not wish to overwrite the custom
Preset.
30. Select the Preset Text text box and enter a unique
analog Preset description.
Note
If you used a factory Default Preset or a custom
User Preset as a “make-from” and you want to add
the new Preset to the list of User Presets
contained in your MTX5000 IDU, you must know
the highest user Preset number contained in your
IDU. To add the new Preset to the list of User
Presets, go to step 31.
If you used a custom User Preset as a “make-
from” and you want to use it to replace (overwrite)
an existing custom User Preset, go to step 33.
31. Select the Preset Number text box and enter any
Preset number that is higher than the current highest
user Preset number in your MTX5000 IDU.
32. Select the Submit option button and observe that the
Preset Number automatically displays the next higher
Preset number available in the Preset User list. Go to
step 34.
33. Select the Preset Number text box, enter the Preset
number that you wish to overwrite, and select the
Submit option button.
34. Observe the new Preset configuration has been
loaded into the MTX5000 IDU and the new Preset
name and Preset number are displayed on the Main
page.
5.5.2 Create or Update Custom Digital COFDM
Preset Configuration in Remote Mode
The procedure required to create a new custom digital COFDM
Preset configuration or to update an existing Preset configuration
in the Remote mode is contained in the following steps.
When preparing a new user digital COFDM Preset, you must first
select an existing digital COFDM Preset from either one of the
digital COFDM factory default Presets or from your own custom
digital COFDM Presets. The selected Preset will be used as a
“make-from” to prepare the new digital COFDM Preset
configuration.
Please note that while factory default digital COFDM Presets
may be used to prepare a new Preset configuration, these
factory default Presets cannot be changed or deleted. They
can only be used as “make-froms”.
When the new configuration is prepared using the factory default
Preset, it cannot be saved with the factory Preset number or
Preset name. A new Preset number and Preset name must be
assigned to the new Preset.