User Manual Part 2

Advanced Operations 5-90MTX5000 User and Technical Manual
Note
In the following step, if the Remux pull-down menu
On option is selected, the Bit Rate Auto pull-down
menu will become inactive, the ASI Bit Rate text
box becomes active, and the bit rate can be
changed.
49. Use the Encoder - Remux pull-down menu to select
On or Off, as required.
50. Select the Encoder - GOP Length text box and enter
the group of pictures length required.
51. Use the Encoder - Aspect ratio pull-down menu to
select 16:9 or 4:3, as required.
52. Use the Encoder - VBI pull-down menu to select On
or Off, as required.
53. Select the PID - Video text box and enter the program
identifier, as required.
54. Select the PID - PCR text box and enter the program
identifier, as required.
55. Select the PID - PMT text box and enter the program
identifier, as required.
56. Select the PID - Audio 2 text box and enter the
program identifier, as required.
57. Select the PID - Data text box and enter the program
identifier, as required.
58. Select the PID - Audio 1 text box and enter the
program identifier, as required.
59. Select the Encoding - Service Name text box and
enter the service name, as required.
60. Select the Encoding - Network Name text box and
enter the network name, as required.
61. Use the Encoding - Data Enable pull-down menu to
select Off, TTV Format, CJM2 Format, or Low Delay
CJM2, as required.
62. Use the Encoding - Baud Rate pull-down menu to
select 1200, 2400, 4800, 9600, 19200, or 38400, as
required.
63. Select the Submit option button.
64. Select the Preset tab and observe the Preset page is
displayed.
Notes
In the following steps, if a factory default digital
LMS-T Preset was used as a “make-from” to
prepare this custom Preset, the Preset Text text
box and the Preset Number text box must be
changed. You cannot change or overwrite any
factory default Presets!
If a custom digital LMS-T Preset was used as a
“make-from” to prepare this custom Preset, a brief
description of the custom Preset should be entered
in the Preset Text text box for easy identification
purposes. The Preset number must be changed
only if you do not wish to overwrite the custom
Preset.
65. Select the Preset Text text box and enter a unique
digital LMS-T Preset description.