User Manual Part 2

Advanced Operations 5-92MTX5000 User and Technical Manual
2. Observe the Main screen is displayed. See Figure 5-
197.
Figure 5-197: Main Screen - Typical
3. Select the L/R option button for L (Local), as required.
4. Select the PA operation button for PA Off, as required
5. Select the Setup option button and observe the Setup
screen is displayed.
6. Select the Radio option button and observe the Radio
screen is displayed.
7. Select the Next option button and observe the Radio -
2 screen is displayed.
8. Select the Remote Ctrl Option button and observe
the Select Remote Ctrl Opt screen is displayed.
9. Select the Remote option button and observe the
Radio - 2 screen is displayed.
10. Select the Main option button, observe the Main
screen is displayed, and observe the L/R option button
indicates R (Remote).
Channel 1 0Offset
Antenna Ant. Pol.Antenna1 H
RFU1
No RF
RF Band
Preset A
Analog
4.83 & 5.8, 3MHz Vid Dev
RF Output
XX
dBm
<- Status
Setup
Status ->
PA Off
SUM
ODU
IDU
RF
L/R
L
L
PA
Operation
Button
Note
In the following step, XXX.XXX.X.XX is the IP
address of your MTX5000 IDU.
11. At the remote PC, open your web browser, enter the IP
address for your MTX5000 IDU, and press the
keyboard Enter key. The IP address should be
entered as follows:
http://XXX.XXX.X.XX/nfs/main/html
12. After a short delay, observe the remote log in screen is
displayed. See Figure 5-198.
Figure 5-198: Remote Log In Screen - Typical
13. Enter your administrator user name in the User Name
text box, enter your administrator password in the
Password text box, select the Log In option button,
and observe the MTX50000 Main Page is displayed.
See Figure 5-199 on page 5-93.