User Manual Part 2

Advanced Operations 5-107MTX5000 User and Technical Manual
Figure 5-218: Main Screen - Typical
3. Select the Main screen PA operation button for PA
Off, as required.
4. Select the L/R option button for L (local mode), as
required.
5. Select the Setup option button and observe the Setup
screen is displayed. See Figure 5-219.
Figure 5-219: Setup Screen
6. Select the Radio option button and observe the Radio
screen is displayed. See Figure 5-220.
Channel 1 0Offset
Antenna Ant. Pol.Antenna1 H
RFU1
No RF
RF Band
Preset A
Analog
4.83 & 5.8, 3MHz Vid Dev
RF Output
XX
dBm
<- Status
Setup
Status ->
PA Off
SUM
ODU
IDU
RF
L/R
L
L
PA
Operation
Button
Setup
User
Main
Radio
Figure 5-220: Radio Screen
Note
In the following step, the Load Presets from File
and Save Presets to File option buttons will be
inactive (greyed-out) until a USB memory device is
connected to the MTX5000 IDU front panel USB
2.0 connector.
7. Select the Next option button and observe the Radio -
2 screen is displayed. See Figure 5-221.
Figure 5-221: Radio - 2 Screen
Radio
Back
Network Config Level Adjust Color Bars
Calibration
Time & Date
Change Pwd
System Info
License Key
Diagnostics
Next
Main
Radio - 2
Back
Presets Option
Load Presets
from File
Remote Ctrl
Option
Save Presets
to File
PA State
Option
Restore Presets
to Defaults
Main