User Manual
Table Of Contents
- Notices
- Contents
- Introduction
- Product Description
- Routine Operation
- 3.1 Chapter Overview
- 3.2 Overview of Controls, Indicators and Connectors
- 3.3 Preparing for Operation
- 3.4 Using the Display Screens
- 3.5 PTX-PRO Monitoring Operations
- 3.6 PTX-PRO Control Operations
- 3.7 Front Panel vs. Configurator Settings
- Troubleshooting
- Advanced Operation
- 5.1 Chapter Overview
- 5.2 Before You Begin
- 5.3 Create or Update a Configuration
- 5.3.1 Using the Configurator Software
- 5.3.2 Determine Licensed Options
- 5.3.3 Create New Configuration On-Line
- 5.3.4 Load and Modify Configuration Settings On- Line
- Figure 5-7: Load and Modify Configuration Settings On-Line - Sheet 1 of 5
- Figure 5-8: Load and Modify Configuration Settings On-Line - Sheet 2 of 5
- Figure 5-9: Load and Modify Configuration Settings On-Line - Sheet 3 of 5
- Figure 5-10: Load and Modify Configuration Settings On-Line - Sheet 4 of 5
- Figure 5-11: Load and Modify Configuration Settings On-Line - Sheet 5 of 5
- 5.3.5 Load Configuration File into Radio On-Line
- 5.3.6 Change Preset Names in On-Line Mode
- 5.3.7 Create Channel Plan Offline
- 5.3.8 Modify Channel Plan in Offline Mode
- 5.3.9 Load and Modify a Channel Plan On-Line
- 5.3.10 Load Channel Plan File into Radio On-Line
- 5.3.11 Add Licensed Option
- Installation
- 6.1 Chapter Overview
- 6.2 Unpacking
- 6.3 Initial Inspection
- 6.4 Damage in Shipment
- 6.5 Mounting and Cabling
- 6.6 Power Connections
- 6.7 Grounding
- 6.8 Audio Connections
- 6.9 Signal Connections
- 6.10 Data Connections
- 6.11 Powering Up
- 6.12 Configurator Software Installation
- 6.13 Product Modifications
- Replacement Parts
- Theory of Operation
- Index
Routine Operation 3-16PTX-PRO User and Technical Manual
Audio B Type • OFF ✔
• MPEG
✔
Audio B
Mode
•Stereo
✔
• Dual Mono
✔
Audio B Input • Test Tone
✔
• Analog
✔
• SDI EMB
✔
• AES EBU
✔
PID
Information
• PCR (32 -
8190)
✔
• DAT (32 -
8190)
✔
• VID (32 -
8190)
✔
• AUD-A (32 -
8190)
✔
• AUD B (32 -
8190)
✔
COFDM (Special licenses required)
Modulation • QSPK
✔
• 16 QAM
✔
• 64 QAM
✔
Bandwidth • 6 MHz
✔
•7 MHz
✔
•8 MHz
✔
Table 3-1: Front Panel vs. Configuration Setting (Continued)
Parameter
Available
Settings
Set
Using
Control
Switches
Set Using
Configurator
FEC • 1/2 ✔
•2/3
✔
•3/4
✔
•5/6
✔
•7/8
✔
Guard
Interval
•1/32
✔
•1/16
✔
•1/8
✔
•1/4
✔
LMS-T (Special license required)
Modulation • QPSK
✔
• 16 QAM
✔
Bandwidth • 10 MHz
• 20 MHz
✔
FEC • 2/3
✔
Guard
Interval
•1/16
✔
•1/8
✔
Table 3-1: Front Panel vs. Configuration Setting (Continued)
Parameter
Available
Settings
Set
Using
Control
Switches
Set Using
Configurator