User Manual
Table Of Contents
- Notices
- Contents
- Introduction
- Product Description
- Routine Operation
- 3.1 Chapter Overview
- 3.2 Overview of Controls, Indicators and Connectors
- 3.3 Preparing for Operation
- 3.4 Using the Display Screens
- 3.5 PTX-PRO Monitoring Operations
- 3.6 PTX-PRO Control Operations
- 3.7 Front Panel vs. Configurator Settings
- Troubleshooting
- Advanced Operation
- 5.1 Chapter Overview
- 5.2 Before You Begin
- 5.3 Create or Update a Configuration
- 5.3.1 Using the Configurator Software
- 5.3.2 Determine Licensed Options
- 5.3.3 Create New Configuration On-Line
- 5.3.4 Load and Modify Configuration Settings On- Line
- Figure 5-7: Load and Modify Configuration Settings On-Line - Sheet 1 of 5
- Figure 5-8: Load and Modify Configuration Settings On-Line - Sheet 2 of 5
- Figure 5-9: Load and Modify Configuration Settings On-Line - Sheet 3 of 5
- Figure 5-10: Load and Modify Configuration Settings On-Line - Sheet 4 of 5
- Figure 5-11: Load and Modify Configuration Settings On-Line - Sheet 5 of 5
- 5.3.5 Load Configuration File into Radio On-Line
- 5.3.6 Change Preset Names in On-Line Mode
- 5.3.7 Create Channel Plan Offline
- 5.3.8 Modify Channel Plan in Offline Mode
- 5.3.9 Load and Modify a Channel Plan On-Line
- 5.3.10 Load Channel Plan File into Radio On-Line
- 5.3.11 Add Licensed Option
- Installation
- 6.1 Chapter Overview
- 6.2 Unpacking
- 6.3 Initial Inspection
- 6.4 Damage in Shipment
- 6.5 Mounting and Cabling
- 6.6 Power Connections
- 6.7 Grounding
- 6.8 Audio Connections
- 6.9 Signal Connections
- 6.10 Data Connections
- 6.11 Powering Up
- 6.12 Configurator Software Installation
- 6.13 Product Modifications
- Replacement Parts
- Theory of Operation
- Index
Advanced Operation 5-11PTX-PRO User and Technical Manual
Figure 5-8: Load and Modify Configuration Settings On-Line - Sheet 2 of 5
MPEG Tab
General Tab
ASI RateChroma
Select new
Chroma option,
as required
Delay
Select new
Delay option,
as required
HD Format
Select new HD
Format option,
as required
(Active in HD
mode only)
HD/SD
Select new HD or
SD option, as
required (License
required for HD
mode)
Input
Select new Input
option, as
required
Network
Modify Network
Name as
required (10
characters
Max)
Service
Modify Service
Name, as
required (10
characters Max)
Presets
Select Preset
X to be
modified, as
required
Radio Type
Select new
Radio Type
option, as
required
A
B
Note
Perform all operations on the MPEG page for each
active Preset to be modified, as required.
C
Change ASI rate,
as required. If
Chroma setting
is 4:2:0, valid
range is 1.5 –
15.0; if Chroma
setting is 4:2:2,
valid range is 2.0
– 50.0
From Figure 5-7
To Figure 5-9
To Figure 5-10