User Manual

Advanced Operation 5-12PTX-PRO User and Technical Manual
Figure 5-9: Load and Modify Configuration Settings On-Line - Sheet 3 of 5
Audio A and
Audio B
Input
Select new Input
option, as
required (Active
in MPEG mode
only)
Mode
Select new Mode
option, as
required (Active
in MPEG mode
only)
Type
Select new audio
Type option, as
required
Encryption PID Info
AUD-A
Enter new Audio
A PID, as
required (Range
is 32 - 8190)
AUD-B
Enter new Audio
B PID, as
required (Range
is 32 - 8190)
DAT
Enter new data
PID, as required
(Range is 32 -
8190)
Default PID
If check box is
selected, default
PIDs will be used.
If check box is
not selected, PID
data must be
entered manually
PCR
Enter new PCR
PID, as required
(Range is 32 -
8190)
Spectrum VID
Enter new video
PID, as required
(Range is 32 -
8190)
Wayside
Baud
Select new Baud
rate, as required
(Active in IRD
Compatible and
Strata
Compatible only)
State
Select new State
option, as
required
B
Note
Enter PIDs only if Default PID was not checked.
If Default PID was checked, go to COFDM tab.
Type
Select new
encryption Type
option, as
required
Select new
Spectrum option,
as required (Not
active on some
radio
configurations
E Key and E ID 1 Key
Enter 1 Key data
Enter E Key and
E ID data, as
required
Note
BISS encryption is a factory-enabled option.
BISS options may only be selected if BISS has
been enabled at the factory.
From
Figure
5-8