User Manual
Table Of Contents
- Notices
- Contents
- Introduction
- Product Description
- Routine Operation
- 3.1 Chapter Overview
- 3.2 Overview of Controls, Indicators and Connectors
- 3.3 Preparing for Operation
- 3.4 Using the Display Screens
- 3.5 PTX-PRO Monitoring Operations
- 3.6 PTX-PRO Control Operations
- 3.7 Front Panel vs. Configurator Settings
- Troubleshooting
- Advanced Operation
- 5.1 Chapter Overview
- 5.2 Before You Begin
- 5.3 Create or Update a Configuration
- 5.3.1 Using the Configurator Software
- 5.3.2 Determine Licensed Options
- 5.3.3 Create New Configuration On-Line
- 5.3.4 Load and Modify Configuration Settings On- Line
- Figure 5-7: Load and Modify Configuration Settings On-Line - Sheet 1 of 5
- Figure 5-8: Load and Modify Configuration Settings On-Line - Sheet 2 of 5
- Figure 5-9: Load and Modify Configuration Settings On-Line - Sheet 3 of 5
- Figure 5-10: Load and Modify Configuration Settings On-Line - Sheet 4 of 5
- Figure 5-11: Load and Modify Configuration Settings On-Line - Sheet 5 of 5
- 5.3.5 Load Configuration File into Radio On-Line
- 5.3.6 Change Preset Names in On-Line Mode
- 5.3.7 Create Channel Plan Offline
- 5.3.8 Modify Channel Plan in Offline Mode
- 5.3.9 Load and Modify a Channel Plan On-Line
- 5.3.10 Load Channel Plan File into Radio On-Line
- 5.3.11 Add Licensed Option
- Installation
- 6.1 Chapter Overview
- 6.2 Unpacking
- 6.3 Initial Inspection
- 6.4 Damage in Shipment
- 6.5 Mounting and Cabling
- 6.6 Power Connections
- 6.7 Grounding
- 6.8 Audio Connections
- 6.9 Signal Connections
- 6.10 Data Connections
- 6.11 Powering Up
- 6.12 Configurator Software Installation
- 6.13 Product Modifications
- Replacement Parts
- Theory of Operation
- Index
Installation 6-11PTX-PRO User and Technical Manual
PRO. Video input selections are made by selecting Presets
created using the Configurator software.
Video input options for the PTX-PRO are shown in Table 6-4.
6.9 Signal Connections
Details of the PTX-PRO signal connections are shown in Table
6-5.
Table 6-4: Video Input and Output Signal Options
Operation
Mode
Signal Input
Signal
Output
Notes
MPEG/
COFDM IF
Out
NTSC/PAL
(525/625)
COFDM - RF Up-converted
Channeled RF
signal
SDI (525/625) COFDM - RF
ASI COFDM - RF
Ext IF In 70 MHz RF
6.10 Data Connections
The PTX-PRO contains an RS 232 data connector located on
the rear panel. The male DB-9 connector is used for the
following purposes:
• Radio programming using a PC
• Wayside data communication.
The PTX-PRO can be connected to a PC via a standard null
modem cable or it can be interfaced to a LAN for applications
such as remote monitoring and control.
Table 6-5: Signal Connections
Unit Function Connector Notes
PTX-PRO MONITOR
Connector
75 Ohm
BNC
Female
70 MHz signal output
monitoring connection.
SIGNAL
INPUT
Connector
75 Ohm
BNC
Female
Input may be NTSC 70
MHz IF or composite
video.
SDI/SD/
HD
Connector
75 Ohm
BNC
Female
HD/SD SDI external data
stream input.
SDI/ASI
INPUT
Connector
75 Ohm
BNC
Female
SDI/ASI external data
stream input.
RF Output
Connector
50 Ohm
Type N
Female
13 GHz RF output .