User Manual

Troubleshooting 4-4STRATA TX Operator’s Guide/Tech Ref Manual
Table 4-3: Primary Error Codes
Error Code Meaning Suggested Operator Action Suggested Technical Staff Action
Status Errors
(Some part of System is reporting an abnormal condition.)
E020 TXU IF Fault • Verify condition of all cable
connections.
• Contact technical staff.
Call MRC Technical Support.
E021 TXU RF Fault • Verify condition of all cable
connections.
• Contact technical staff.
Call MRC Technical Support.
E0E0 FMT Video PLL Unlocked Note - This error will appear only if the TX
System contains the FMT option.
• Contact technical staff.
• Verify video input is at the correct
level.
• Call MRC Technical Support.
E0E1 FMT Audio 1 PLL Unlocked Note - These errors will appear only if the
TX System contains the FMT option.
• Check FMT settings using Monitor
Screens and Command Screens.
Settings must match transmitter
settings.
• Contact technical staff.
• Use STRATA TX Configurator to
check FMT settings. Be sure all
settings match the transmitter
settings.
• Use STRATA TX Configurator to
reprogram all the settings in the radio.
• If problem persists, possible
hardware failure. Call MRC Technical
Support.
E0E2 FMT Audio 2 PLL Unlocked
E0E3 FMT Audio 3 PLL Unlocked
E0E4 FMT Audio 4 PLL Unlocked