Manual

1. INTRODUCTION
Welcome to use
MicW
series professional microphones!
MicW
E436 is a miniature clip-on microphone which has outstanding characteristics in
vocal and instrument recording with omni-directional polar pattern. It is ideal for
close-recording with matched accessories and for outdoor use with high moisture
resistance.
2. SAFETY INSTRUCTION
The microphones use pre-polarized capsules which were tested at high temperature and
high humidity environment for more than 24 hours before the factory release. The
microphones are very stable against temperature and humidity. It is safe to operate the
microphones from -20 to 50 C and humidity up to 95%.
3. POWER SUPPLY
Phantom power (+48 V) is required to operate your microphone. We assume no liability
for damage caused to your E436 through defective phantom power. Before activating
phantom power, mute your playback system and connect the E436 to the microphone
input of your mixing console. After activating phantom power, the E436 requires several
seconds to stabilize itself.
4. APPLICATIONS
The E436 is shipped with a number of accessories. It is easy to install E436 on the
instruments. The stereo pair kit of E436 is also available.
.
5. AUDIO CONNECTION
To connect the E436 to your equipment, use a balanced XLR microphone cable with the
following pin assignment: Pin 1 = shielding, pin 2 = +, pin 3 = -. Since all contact points
of the E436 are gold-plated, your microphone cable should feature gold-plated connectors,
if possible.
MICROPHONE E436
Capsule diameter
7.0mm
Principle of operation
Pressure
Polar Pattern
Omni
Sensitivity (±2 dB)
12 mV/Pa; -38.5 dB re. 1V/Pa
Frequency Response
20 Hz ~ 20 kHz
Power Supply
48 V Phantom power with
PI48 Adaptor
Total Harmonic Distortion
(THD)
1% up to 135 dB SPL
Thermal Noise
32 dBA
Output Impedance
200 Ohm
Dimensiions
7mm×28mm
Weight
4g
Connector
3-pin XLR
11. PACKING LIST
1 E436 microphone
1 PI48 Adaptor
2 CL011Collar Clip
4 WS095Wind Screen
2 SM011/012Surface Mount
4 Double-sided adhesive
1 Users manual