Tablet PC Andriod 4.
Tablet of Contents Specifications………………………………………………………………….1 What’s inside the box…………………………………………………………1 Tablet Parts……………………………………………………………………2 Getting started………………………………………………………………...4 Connection to Internet………………………………………………………..7 Task Bar………………………………………………………………………..9 Install and Uninstall…………………………………………………………..10 Camera……………………………………………………………………….11 HDMI………………………………………………………………………….12 Trouble Shooting…………………………………………………………….
Specifications Display: 7 inch 800X480 Resolution Capacitive screen CPU: Boxchip A10 RAM: 1GB DDR Internal Storage: 4GB Expansion Memory: USB & TF card, 32GB Max. Built-In Wireless: 802.11b/g Adapter AC Adapter: DC 5V-2A Operating System: Andriod 4.
Tablet Parts 2 9 4 6 2 5 2 7 2 1 Volume - 2 Volume + 3 Power ON/OFF button 4 Headset Port 5 TF card slot 6 HDMI Port 7 RESET Button 8 5Pin USB Port 9 DC Jack 3 1 2 8 2 Getting Started
Battery Charging The tablet has a built-in rechargeable Li-polymer battery. 1. To charge connect the AC power adapter to the DC jack on the right side of the tablet. 2. The LED indicator will illuminate to show the battery is charging. The LED indicator will turn “OFF” when it’s fully charged. 3. The tablet can be used even if the battery is being charged. Power ON/OFF ON: 1. Press and hold the power button until the tablet turns “ON”. OFF: 1. Press and hold the power button until device optional 2.
1. Close all applications and documents which have been opened from the TF card. 2. Select “Setting” and find “ Storage” then click “Unmount SD card”. 3. A prompt will be seen on the screen saying “ SD card safe to remove” 4. Gently press the TF card to remove and pull out the TF card. Note: Insert the TF card in correct position, otherwise it will damage the card and the slot.
drag the application icons into the shortcut bar. How to connect with computer Note: first should put the switch to Device status, Before transporting documents, firstly you must set store mode for your MID. 1. Use USB cable to connect MID with computer. Notice bar will appear notice cue. 2. Press Menu button to pop up Menu option, and click on Notice. 3. In the notification panel, click on the USB connection, then click Loading USB Storage Device. 4. Then the USB connection has been successfully.
Ethernet: 1. Connect the Ethernet cable to the Ethernet port of the tablet. 2. Select “Settings” and Select “ More…” then Select “Ethernet” Wireless: 1. Select “ Settings” 2. Select “Wi-Fi” and slide OFF to ON status. 3. All detected wireless networks in the area will e listed, Click to select desired wireless connection. 4. Enter WEP key or network key if necessary. 5. Once connected to a wireless network, settings will be saved 6. Wireless icon will appear on the taskbar when connected successfully.
First, you need to buy a 3G wireless card from your 3G service provider. The equipment at present supports: Huawei EVDO: EC122 EC169C WCDMA: E1750 E1752 K3765 Since our company is continuously committed to improving product quality and the software edition is always updating which will support more models in the future, please refer to the finished products. You have to buy above mentioned model to get access to 3G network. Insert your SIM card into the 3G card and then insert the 3G card into the USB port.
Select the checkbox on the back of 3G network and you’ll see which means 3G connection is completed. Web Browsing Connect to the internet via Ethernet or wireless and launch the browser.
Return/Back Destktop Menu Wifi network Install and Uninstall Install from memory card or USB drive Please go to APK Manager，Select “Install” and then select the file with the extension name .apk in the memory card. Select “Install” to install the software. Install application from internet You can use App Market to search any application you want, after download finish it will automatic install ** Go to http://Android.
Camera Touch the icon to enter camera mode and the interface is shown as follows: 1.Touch the icon at the bottom right and you can save your photos in DCIM/Camera directory in TF card. 2. Move the icon film mode. on the right and you can switch camera mode to 3. touch the icon on the top right to see the previous picture and you can also delete, share, set it as the wallpaper or contact profile. Click finish button to exit camera interface.
Note: this tablet supports video talking function HDMI You can switch the video to play it on the HDMI display equipment (such as TV with a HDMI interface) by HDMI. The maximum output resolution is 2160p and its method is shown as follows: 1. Open the Tablet; 2. Connect the Tablet to TV by a HDMI cable. Open the TV; 3. Play video on the Tablet; 4. The video will be switched on the TV. Wait for more than 5 seconds; 5.
Tap the application you want to close. A pop-up window will be displayed. Tap “Stop” to close that application. Mandatory Power off 1. Press and hold the power button for 7 seconds and the device will be powered off. 2. Press the reset button on the right and the device will be forced to be powered off. Restore Default Setting If you want to reset the factory setting and erase all materials, please press Settings → Privacy → Factory data reset.
Tablet PC
