Operation Manual

26
Make the transfer box connected to the USB switch interface of the devices, and then plug
the network cable into the Ethernet port of the transfer box, in the upper right corner of the
screen appears "ETH".
Tap
Ethernet application icon.
The device can automatically access network IP address connection. And you can choose
manual setup IP address to get a connection.
33 SETTINGS
Wireless &
networks
Wi-Fi
Turn on Wi-Fi.
Wi-Fi Settings
Set up & manage wireless access points.
Airplane mode
Disable all wireless connections.
3G network settings
Set up 3G network.
Ethernet
Configure Ethernet.
Pppoe
settings
Do ADSL settings. Input user name and password to
connect.
USB
Mass storage
Configure USB to mass storage.
ADB
Configure USB to ADB.
Sound
Silent mode
Silence all sounds except media & alarms.
volume
To adjust the Media volume, Alarm volume and
Notification volume. Tap & slide
and then tap OK.
Notification ringtone
Select desired ringtone sound.
Audible selection
Select to enable a sound when making a screen selection.
Screen lock sounds
Play sounds when locking and unlocking the screen.
Display
Brightness
Tap & slide
to adjust the screen
brightness as desired, and then tap OK.
Auto-rotate screen
When selected, the orientation of the screen switches
between Portrait and Landscape automatically when you
rotate the device.
Screen timeout
Adjust the delay before the screen automatically turns off.
Suspend timeout
Adjust the delay before the device automatically suspend
after the screen turn off.
Security
Set up screen lock
Lock screen with a pattern, PIN, or password.
Visible passwords
Show password as you type.
Select device
administrators
Add or remove device administrators.
Use secure
credential
Allow applications to access secure certificates and other
credentials.