Operation Manual

2. 3G card loaded with SIM card then connect the 3G USB dongle to the table pc.；
3. After connected 3G dongle，click setting → wireless & network →more→
mobile network，to set the 3G network。
4. Open mobile network：click data flow started→ data wander to choose “Access Point
Names”, then click “Menu” button, then to set “New APN” Take Chinese WCDMA
mobile operator as example to set the 3G network as below:
Name：3GWAP / APN:3gnet / Proxy：Not set/ Port：80 / Username：Not set/ Password：
Not set/ Server：Not set/ MMSC: Not set / MMS proxy Not set/ MMS port: Not set /
MCC:460/ MNC:01/ Authentication type：Not set/ APN type：Not set/
After setting finished, then 3G network is connected then will display ,if this
logo show as darker state it means it is the searching of network ,if show as blue state
means it has been connected with network , display means the date is under
transmission.
7 Desktop
③ ② ①