Operation Manual

21
DL351 Modular I/O
Operator Manual
Chapter 6: Operation
This chapter explains the default screen. There are no operating procedures associated
with the DL351 Modular I/O, as it is operated solely from the PRO6 Control Centre.
Refer to PRO6 Control Centre operator manual (part number DOC02-DL3) for more
details.
Default screen
The default screen appears after the unit has been switched on and has powered up.
The following diagram shows a typical default display.
Checking the CBMA/software versions
You can check the CBMA and host software versions of the DL351 Modular I/O during
normal operation. To do this, see “To view the CBMA version number” on page 18 and
“To view the current host software version” on page 18, respectively.
1 Company name and model of unit.
2 Unit ID number.
3 Description of unit.
1
2
3