Operation Manual

16 Chapter 5: Programming Mode
DL431 Mic Splitter
Operator Manual
Menu flowchart (menus 6 and 7)
Menus
Programming mode has the following menus:
• 1 MicSplit ID — for setting up the DL431 Mic Splitter’s network unit ID (see “1
MicSplit ID menu” below).
• 2 AES50 Sync — for selecting the method of synchronising the AES50 (see “2
AES50 Sync menu” on page 17).
• 3 Local Mode — for setting up mode type (see “3 Local Mode menu” on page 18).
• 4 48V Control — for selecting the 48V phantom voltage source (see “4 48V
Control” on page 19).
• 5 AES50 Status — for viewing/clearing the AES50 values (see “5 AES50 Status
menu” on page 19).
• 6 S/W Version — for displaying the host software and CBMA versions that the unit
is currently running.
• 7 Reset All — resets all settings to default (see “7 Reset All menu” on page 20).
Menu 6
A
Go to A on
page 14
C
Menu 7