Operation Manual

20 Chapter 5: Programming Mode
DL431 Mic Splitter
Operator Manual
7 Reset All menu
This menu lets you set all of the DL431 Mic Splitter’s settings to default. For example,
it will set the ID number to 1, 48V control from A, all gains to 0dB etc.
Important:
Use this menu with caution. Make sure you really want to reset all settings to
default before proceeding.
>> To reset all settings to default
1 In programming mode, select menu 7 (see “To select a
menu” on page 13).
2 Press the up arrow button. (Pressing the down arrow
will display the “No” option.)
3 Do one of the following:
• To reset all settings to default, press SELECT.
• If you don’t want to clear the values, press MENU.