Operation Manual

16 Chapter 5: Programming Mode
DL451 Modular I/O
Operator Manual
5 At the “Clock Setup(out)” option, press SELECT.
6 Use the up/down arrow buttons to go to the desired
pair of output channels. For example, “Channels 7-8”.
7 Press SELECT.
8 Use the down arrow button to go to the desired option.
For example, “48K”.
9 Press SELECT.
10 Use the MENU button to exit.
>> To set up the SRC setting
1 In programming mode, select menu 5 (see “To select a
menu” on page 9).
2 Press MENU.
3 Use the down arrow button to go to the board you
want to set up. For example, board “C”.
4 Press SELECT.
5 Use the down arrow button to go to the “SRC options”
option.
6 Press SELECT.