Quick Start Guide DN32-LIVE SD/SDHC and USB 2.
DN32-LIVE Important Safety Instructions Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼" TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
4 DN32-LIVE mesa especificados por el fabricante o suministrados junto con el equipo. Al transportar el equipo, tenga cuidado para evitar daños y caídas al tropezar con algún obstáculo. 13. Desenchufe el equipo durante tormentas o si no va a utilizarlo durante un periodo largo. 14. Confíe las reparaciones únicamente a servicios técnicos cualificados.
6 DN32-LIVE TURBOSOUND, TC ELECTRONIC, TC HELICON, BEHRINGER, BUGERA et COOLAUDIO sont des marques ou marques déposées de MUSIC Tribe Global Brands Ltd. © MUSIC Tribe Global Brands Ltd. 2018 Tous droits réservés. GARANTIE LIMITÉE Pour connaître les termes et conditions de garantie applicables, ainsi que les informations supplémentaires et détaillées sur la Garantie Limitée de MUSIC Tribe, consultez le site Internet musictri.be/warranty.
8 DN32-LIVE 8. Não instale perto de quaisquer fontes de calor tais como radiadores, bocas de ar quente, fogões de sala ou outros aparelhos (incluindo amplificadores) que produzam calor. 9. Não anule o objectivo de segurança das fichas polarizadas ou do tipo de ligação à terra. Uma ficha polarizada dispõe de duas palhetas sendo uma mais larga do que a outra. Uma ficha do tipo ligação à terra dispõe de duas palhetas e um terceiro dente de ligação à terra.
10 DN32-LIVE Quick Start Guide 11 4. USB Operation The USB connection on the DN32-LIVE card provides 32 channels of bi-direction audio I/O via USB 2.0, as well as MIDI I/O and remote DAW control via HUI/MackieControl emulation. Make sure to download and install the free ASIO driver from klarkteknik.com if you are using a Windows PC. The DN32-LIVE is CoreAudio compliant and therefore does not need a driver for use on Mac computers. 4.
12 DN32-LIVE 16 in / 16 out – If you don’t actually need more than 16 concurrent input and output tracks to be exchanged between the console and your PC, then this mode might be more appropriate for you. First, it will slow the required bandwidth on the interface down. Second, there will be no excessive I/O tracks in your DAW configuration that might clutter your setup.
14 DN32-LIVE The ‘Channel Routing’ section is explained in chapter 5.3. Quick Start Guide 15 5.3 Channel Routing The M32 has a convenient routing preset that allows the input channels to quickly flip between the desired monitoring for the recording process, and the playback from the DN32-LIVE card once recording is finished. While Playback would typically be used to assign the card outputs to the mixer inputs, Recording would patch those signals to channel inputs that shall be on mix, i.e.
16 DN32-LIVE 6. Battery Option The DN32-LIVE has a battery slot that can accommodate a CR123A Lithium cell battery. This provides protection in case of power blackout, ensuring secure file handling. To attach the battery, first turn the console power off and remove the DN32-LIVE card from the expansion slot. Locate the battery slot and install the battery, making sure to orient the positive end toward the “+” mark on the slot. Reinstall the DN32-LIVE card as described in chapter 2.
18 DN32-LIVE Quick Start Guide 19
