User Manual

11 M32 User Manual
1.8 Main Bus
(1) LEVEL Rotary
Adjust the overall send level to the Mono Bus with the LEVEL rotary control.
(2) PAN/BAL Rotary
When the selected channel is assigned to the Stereo Bus, the PAN/BAL
rotary control adjusts the left to right positioning of the audio signal.
(3) MONO
Press the MONO button to assign the selected channel to the Main Mono/
Centre Bus.
(4) ST
Press the ST select button to assign the selected channel to the Main
StereoBus.
(5) VIEW
Press the VIEW button to access more detailed parameters on the Main
Display. See the section Main Display - main for more details.
1.9 RECORDER
(1) USB Port
Connect a USB stick to install rmware updates and to record performances.
(2) ACCESS
The ACCESS LED illuminates to indicate that a USB stick is in place and is
being written to or read from.
(3) VIEW
Press the VIEW button to open the USB Recorder pages on the Main Display.
Operation
The M32 oers functionality for playing back uncompressed stereo WAV
les, and for recording any available signal in the console directly onto USB
stick or compatible USB hard drive.
To record to a USB stick, perform the following steps:
1. Plug a FAT-formatted (FAT12, FAT16, FAT32) USB stick into the USB port
as illustrated above.
2. Press the VIEW button in the RECORDER panel. This will then display
a graphic representation of an analogue tape deck on the Main Display
home tab.
3. On the cong tab you can select the source of the recording , thedefault
being the main L & R outputs.
4. Press the fth push encoder, labelled Record.
5. To adjust the volume during playback, press the AUX IN/USB button
next to the input channel faders, and adjust the volume using AUX
faders 7 & 8.
(3)
(1)
(2)
(4)
(5)
(1)
(2) (3)