User's Manual

46 Chapter 6: Dual Stereo Input Channel
VeniceF
Operator Manual
Gain (stereo mic inputs)
This section has the same functionality as the gain section of the mono input channels
except for the following. For full details, see “Gain” on page 34.
• 20dB pad switch On dual stereo input channels the pad switch has no effect upon
the left and right line levels. Overloads are indicated on the meter by the red LED at
the top (see “Fader and meter” on page 52).
• mic gain control knob This is a dual-concentric mic gain knob. The adjacent
left/right symbol informs you that top control knob adjusts the left channel and the
bottom one adjusts the right channel.
• 80Hz switch On dual stereo channels, this switch has no effect upon the left and
right line inputs.
• left Ø switch On dual stereo channels, this microphone phase switch causes a
180-degree phase change (with respect to the input signal) in the left input amplifier
only, such that the channel signal will have opposite polarity to the input signal. This
switch has no effect upon the left and right line inputs.
Mic gain section of the dual stereo input channels
FireWire
Similarly to the mono input channel, this section lets you select the channel input
source as mic/line (analogue) or FireWire (digital) and select the FireWire output signal
as pre-EQ or post-EQ (see “FireWire” on page 35). In addition, this section has an
orange firewire out LED that shows you whether or not the FireWire signal is sourced
from the local dual stereo input channel (see “FireWire” on page 58).
FireWire section of the dual stereo input channels