Specifications
Patching
MIDAS digital systems are much more than a “mixer” – they are complete digital
audio distribution networks.
The XL8 has a network capacity of 432 inputs and 432 outputs, the PRO3, 6, and 9
all have capacities of 288 inputs and 294 outputs, PRO2 and PRO2C oer up to 156
inputs and 166 outputs and the PRO1 has up to 100 inputs and 102 outputs. All of
these network connections can be patched and routed independently of the audio
passing through the “mixer”. Any correctly-directioned connector can be mapped
to any node on the mixer, and any correctly-directioned node elsewhere on the
network, simultaneously! Modular I/O devices (DL451, DL351 and PRO3/6/9 control
centres) feature a modular, user-congurable card-based system which permits
any combination of analogue and/or digital inputs and/or outputs to be deployed
depending upon the requirements of the event.
The patching GUI is presented to the user in a highly visual, easily understood
pictorial format, enabling quick, easy operation and comprehension of a large and
potentially complex audio network. The format, conguration, routing and patching
of the entire network can be re-congured instantaneously on a scene-by-scene
basis by using the consoles automation system.
Areas A and B
MIDAS’ digital control surfaces can be divided into two areas, Area A and Area B
facilitating dual operator use on XL8, PRO3, 6 and 9. The input channel area on the far
right of the surface (3 channels on PRO2 and PRO2C, 4 channels on a PRO3, 6 and 9
and 8 channels on an XL8) can be designated as Area B. The input control channels
on the right-hand side of the Control Centre can now be used independently of
those on the left.
VCA and POPulation groups can be pre-selected to populate either Area A or B. This
means a group of inputs can populate dierent areas of the surface. The engineer
brings the required inputs to their local work surface, where they are quickly and
easily identied and changes implemented.
There are two independent stereo solo busses available. Any input or output
channel can be assigned to either monitor buss. Allowing on XL8, PRO3, 6 and 9, two
operators to work simultaneously or for stage monitor and in ear monitor systems to
be separated.