Specifications
Audio System Engine
MIDAS DL371
The PRO3, 6 and 9 processing engine is a 7U 19” rack mount unit, which houses up
to 7 audio processing modules and routing hardware. Employing advanced FPGA
architecture, it has three removable power supplies, only two of which are required
for full operation. The power supplies are auto-voltage sensing, auto-switchover, hot-
swappable, are tted with locking AC connectors and are identical to, and therefore
interchangeable with the PSU’s in the PRO3, 6 and 9 Control Centre.
The engine has dual-redundant HyperMAC ports, both CAT-5e and optical, which
provides the digital equivalent of a 384-way (192 in + 192 out) multi-core between
the stage and FOH. There are also eight AES50 ports, which facilitate connections to
the PRO Series DL351 stage box, and/or other AES50 I/O hardware. It is also possible
to use any PRO Series with DL251, DL351, DL451 and DL431 plus the KLARK TEKNIK
DN9696 Hi Resolution Audio Recorder and DN9650 Network Bridge.
The processing engine is loaded with 4 modules for a PRO3, 5 for a PRO6 and 6 for a
PRO9 in the standard conguration, with an extra-cost option for an n+1 redundant
spare module.
Overview:
A One DL371 included in a PRO Series Live Audio System
A N+1 PSU redundancy
A Dual redundant HyperMAC ports
A Eight AES50 ports
A Ethernet tunnel connection
A Word Clock and AES3 sync connections
A Advanced FPGA architecture
A Upgrade options for upgrading a PRO3 to a PRO6 or PRO9 and PRO6 to a PRO9
A 7U