Operation Manual

Delay effect 167
PRO Series Live Audio Systems
Owner’s Manual
10 Damping section Contains a HF control knob that adjusts the HF
attenuation of delay repeats and an LF control knob
that adjusts the LF attenuation of delay repeats.
11 EQ section Contains a HI control knob that adjusts the amount
of HF (high EQ) cut or boost applied to the output.
LO control knob adjusts the amount of LF (low EQ)
cut or boost applied to the output. Range of both is
-12 to +12, with 0 at top dead centre.
12 Rate control knob Adjusts rate of delay modulation. Range is between
0.001Hz and 10Hz, with 0.7Hz at top dead centre.
13 Model select
button
Selects digital or analogue delay resolution. Current
selection is shown by the illumination of one of the
LEDs above (Dig. or Anlg.).
14 LR Out section Contains an ON switch for activating delay.
15 Gain control knob Adjusts the amount of gain between -20 and +20,
with 0 at top dead centre.
16 Mix control knob Adjusts the mix between dry (0%) wet (100%).
17 HF Depth control
knob
Adjusts depth of delay modulation. Range is 0 to
100, with 50 at top dead centre.
18 Right channel
delay time control
knob
For entering the desired delay time (in ms).
19 Tempo control
knob
Adjusts the tempo in tempo mode. Range is from 60
to 240 beats per minute (bpm).
20 Tap button For manually tapping the tempo once the unit is in
BPM Synch (TAP TEMPO) mode.
Item Control Function