Operation Manual
182 Chapter 17: Control Groups
PRO Series Live Audio Systems
Owner’s Manual
>> To open the Talk Groups screen
At the GUI, choose home
Control GroupsTalk Groups.
>> To deactivate a talk group
Do one of the following:
• Press the button of the talk group that is currently active.
• Quickly press a talk group button other than the one currently active.
• Press and hold down (for more than one second) a talk group button other than the
one currently active. This will activate the talk group whose button you are
pressing.
• Switch off both the TALK (internal) and OSC (internal) buttons.
About the control group screens
Each type of control group
screen has — apart from the
channel strip, which is
common to most screens —
two main areas (shown
right). The management
section at the top lets you
choose the group members,
and is common to all control
group types. While the
bottom section contains the
controls and sections
specific to each type, which
are described later on in this
chapter.
Management section
The group management section of each control group screen has two main panels. The
left panel has five group-dependent lists of channels/mixes from which you can choose
group members. The right panel contains the current group members (the example
below shows a VCA group). Group members are moved between the two main panels
using the ADD and REMOVE buttons.
Typical management section of control group screen
Management
section
(common)
Group-
specific
section
4
5
1
2
3