Operation Manual

300 Chapter 30: Inputs

PRO Series Live Audio Systems

Owner’s Manual

In the GUI channel strip, the EQ processing area (shown below) displays all four bands

simultaneously and has a graph that shows a colour-coded EQ envelope for each

selected band. Here, you can view the settings of the four bands simultaneously. The

GUI also shows the ranges available for each control knob and indicates the active

band, which is distinguished by its cream-coloured background.

EQ controls for the input channels in the GUI channel strip. Shows the treble and bass

modes, selected via the SHAPE buttons.

6 freq control knob Adjusts signal frequency. The range is band-

dependent (see “Main input channel functions” on

page 364). On the graph in the EQ processing area

(GUI channel strip), this control causes the envelope

to move left/right.

7 SHAPE button Changes shelving mode on treble and bass bands.

For recommended usage, see Table 18

“Recommended band mode usage” on page 301. For

a description of each mode, see “Description of the

input channel EQ modes” on page 345.

Item Element Description

8 Graph Shows the EQ envelope (see “EQ graph” on

page 301).

9 Bright background Highlighted section indicates active band.

10 Icon Represents the shape of the signal’s envelope. Note

how the treble modes point to the left and the bass

ones to the right.

11 Text “OFF” is displayed when the EQ is switched off.

Item Element Description

Treble and bass

shelving modes

6 7