Operation Manual

308 Chapter 30: Inputs

PRO Series Live Audio Systems

Owner’s Manual

LCD select button

The LCD select buttons in the input fast strips

are used for input channel navigation and

group selection. They also provide useful

feedback for the user.

For more information on navigation, see

“Navigating the input channels” on page 59.

Mute, solo and safes

This section contains the MUTE and SOLO buttons, and three safe LEDs (mute safe,

auto safe and fader safe).

Mute, solo and safes for the input channels on the control surface and GUI

Item Control Function

1 MUTE button Mutes all post-processing signals exiting the channel.

In addition to scene recall, it can also be remotely

muted from the auto-mute masters.

2 SOLO button Activates signal routing to the monitor A section of

the control centre by sending the input channel signal

to PFL mono and AFL stereo buses. The solo system

is auto-cancelling, so that each new solo cancels the

last one. Input solos override any active VCA solos.

This button is a latching type. Give a short press to

latch it and a long press to self-connect when it is

released.

3 B button This solo button (GUI only) changes the operation of

the SOLO switch so that it routes signals to the

monitor B section of the control centre.